CCyclone BOMB!! Cyclone BOMB!!! Cyclone Bomb, Nokia X1-00 / X1-01 Unlock Added

Written by Administrator | 01 July 2010

we are the authorised Reseller

CONTACT US FOR BEST PRICE

Cyclone NEVER SLEEP

Cyclone Bomb, Nokia X1-00 / X1-01 Unlock Added

Hi, new update for Cyclone Box is released.

What's new?
- Added support for LBF data read for new XGold110 based phones, this is X1-00, X1-01, absolutly WORLD FIRST
- Nokia X1-00, X1-01, 100, 101, 102 flashing added
- 20 Digits is now checked upon XGold1xx Hash Read, as users reported 20 digit phones (i.e. new 1616 from Yoigo Spain). The 20 digits phones will not be readed now, to not loss the computation power of SL3 Clusters.
- When 20 Digits NCK is found upon BB5 LBF read, operation will be canceled (previously - asked whether to continue, or not), same reason as up
- Minor changes and bugfixes

How to update?

Just run Cyclone, autoupdate will replace Cyclone.exe.

Join us on facebook: http://www.facebook.com/cyclonebox

More to come,
Best Regards,
Cyclone Box Team

CycloneBox Installer v1.17 with Xperia Addon and more

Cyclone Box FREE and STANDALONE Broadcom Hash Read

Broadcom Unlocking (via LBF Hash Read)/SX4 Authorization/SD Repair/etc is now fully FREE and STANDALONE, just simply as previous models.
No internet connection and credits needed.
Just to remind Cyclone is one box which support all of hashes free and standalone now, this includes reading data from RAP3Gv3, RAP3Gv4, RAPUv1, RAPUv21 (world's first), Broadcom, XGold1, and shortly from XGold2 (maybe free, maybe with credits, we'll decide).

No firmware upgrade is needed. Just run Cyclone and it will auto-update main exe + loaders.

Make sure you have latest installer installed, if not, grab one from http://www.karwos.hk/CycloneBoxInstaller.exe

Firmware required, v01.82 (from Nov 12), no upgrade needed if u have one already.

Best Regards,
Cyclone Box Team

Cyclone Box v1.0.0.11671 Released

Hi, new update is released.

- Added PA_SIMLOC30 Original Nokia RPL Write support in SIMLOCK2 format
- The NCK length is now automatically recognized upon RPL write, so correct NCK array lenght might be assumed
- Minor changes and bugfixes

Autoupdate should do the job, in case of any problems (or interrupted update) you can manually download exe from http://www.karwos.hk/updater/Cyclone.exe and place in C:\Program Files\Cyclone Box\

Best Regards,
Cyclone Team

Cyclone Box Firmware v01.76 Released

Hi, new firmware for Cyclone Box is just uploaded at server.

Added support for Blackberry MEP-29318-002.

Best Regards,
Cyclone Team

Cyclone BOMB!!! RAPUv21 Unlock/SD Repair/RPL Back/Downgrade/SecAnalys/Standalone SX4!

Hi, latest bomb for Cyclone Box is ready

Update is 100% free and standalone for CycloneBox users;-)

- Added FIRST IN THE WORLD, FREE, STANDALONE SL3 UNLOCK by BF FOR LATEST TI BASED NOKIA PRODUCTS (RAPUV2 CPU) this includes Nokia 500, Nokia 600, Nokia 700, Nokia 701 and probably more coming !!!!!! These products are 15 NCK chars so not to worry.

- Added FIRST IN THE WORLD, FREE, STANDALONE SUPERDONGLE REPAIR for RAPUv2 Based Phones

- Added FIRST IN THE WORLD, FREE, STANDALONE SX4 AUTHORIZATION for RAPUv2 Based Phones

- Added FIRST IN THE WORLD, FREE, STANDALONE "FULL RPL" BACKUP (include SUPERDONGLE) for latest RAPUv2 phones

- Added FIRST IN THE WORLD, FREE, STANADLONE DOWNGRADE CAPABILITY for latest RAPUv2 phones

- Added FIRST IN THE WORLD, FREE, STANDALONE Full Security analysis for RAPUv2 phones

- Supported interfaces: USB and FBUS

- Small bug fixes, i.e. PM protection is now unticked by default

Nokia 701, reading sl3 log file

Nk701 detailed security analysis

Nk 701, full RPL

Standalone SX4 operation

Copying our loaders will affect in cracks/clones in market shortly and maybe Broadcom Unlocking business destroy.

At least firmware 1.74 needed (update isn't needed at all).

Don't forget to have installed latest v1.16 installer (http://www.karwos.hk/CycloneBoxInstaller.exe), so Autoupdate module will do the job.

Best Regards,

Cyclone Team

Hi, new firmware for Cyclone Box is just uploaded at server.

Added support for Blackberry MEP-29318-002.

Best Regards,
Cyclone Team

Cyclone Box Firmware v01.75 Released

Hi, new firmware for Cyclone Box is just uploaded at server.

What's new?

- MEP-10129-006 added

- MEP-04626-001 fixed length

- MEP-06529-001 fixed length

- MEP-06529-002 fixed length

- MEP-06530-001 fixed length

- MEP-06530-002 fixed length

- MEP-07321-002 fixed length

- MEP-07723-001 fixed length

- MEP-08881-001 fixed length

- MEP-08882-001 fixed length

- MEP-09292-001 fixed length

- MEP-10073-001 fixed length

- MEP-18601-001 fixed length

- MEP-19877-001 fixed length

- MEP-24660-001 fixed length

- MEP-30218-001 fixed length

Update your box using box maintenance.

Cyclone Box Installer v1.16 BLACK EDITION RELEASED

=====================
Installer v1.16
Black Edition
21.09.2011
=====================



MAJOR FUNCTIONS ADDED
- New BB5 FBUS/USB Loaders v11.24.00 Introduced
- Added Dead USB Flashing for RAPIDO and other FUR-over-USB operations (DO NOT USE FOR CERTIFICATE READ/WRITE!), still "old method" avaiable in connection tab.
- Certificates operations for Rapido FBUS-OVER-USB disabled, because is not supported by loaders ( it will fail without any attempt )
- Rapido Alive FUR-over-USB flashing not supported, flash those phones by Dead variant instead (Switch to RAW mode problem in this models..), or "Old USB Flashing Method"
- "Use OLD USB FLASHING METHOD" moved to BB5/Flashing tab
- "Settings" tab renamed to Connection
- TX2 settings removed from BB5 Flashing Tab
- RAPU Flashing/Booting Improved
- C2-02 XGold2 Flashing "Added" - Cyclone has flashing compatibilty for this model, but MassMemory file couldn't be handled becasue too big. Fixed.
- BB5 Mass Memory Flashing Tested - Cyclone SW has this posibility from long time ago...
- Added "Read Unique Data" button. Use to boot phone by Flashbus directly, and dump Unique Data (for Simlock,SD,...) when phone doesn't have correct BSI resistors value. Dumped unique data might be lately used for USB operations if still FBUS operations fails.
- Old DCT4 Asic 2,5,6,7 Direct Unlock/Relock/Autolock Introduced, finally
- Standalone DCT4 RPL Calculation Introduced, supported Asics: 2,5,6,7,11
- Added support for DCT4 (7250i, 6610i, 2125i, 2865i, 6275i) Product Data RPL Entity Writing for fixing CS
- Added support for generating extended DCT4 RPL with Product Data for above models (CS problems)
- Alcatel Calculator added to gui
- PMM Protection Checkbox added upon PM write. Use to protect PM security fields.
- Diagnostic Module Added
- Selftests moved to new "Diagnostic" module
- Vibra Tests Added
- Backlight Tests Added
- "Autodetect" added for DCT4 Unlocking. Unique method - non ASIC dependand (i.e. avoids RM-189 2310 problems avaiable on all boxes right now). If there is problems with autodetection - user still can select unlocking method manually.
- Removed DCT4 ASK-RPL From Credits Manager
- Removed SuperDCT4 Activation from Credits Manager
- StatusBar messages are more accurate now
- Added "Auto-Rebuild IMEI" checkbox for "Read UEM IMEI" function. Used to automatically generate FLASH IMEI DATA and programm it - one-click REPAIR ??????????????4.
- CacheV2 Introduced
- XGold1/2 Flashing Routines rewritten to be more memory effective
- Dead-erased XGold2 flashing improved, plus added some messages regarding to reviving dead XG2
- USB Connection Type is now selected automatically when XGold2 platform found
- The supported MEP List are now acquired from box once Blackberry Tool launch
- Moved UEM stuff to new "ASK/RPL Tool"
- XGold2 MassMemory flashing added
- Remaining XGold Credits are now shown upon launching of Nokia Tool (Those one used for XGold1 LBF, Blackberry Codes Service, etc)
- Default Security Area XGold Service count increased from 50 to 100 (100 phones limit between SA updates for Blackerry,XGold1,...)
- XGold/Blackberry service is now also checked upon Blackberry tool startup, also after each Code calculation remaining Calculation Limit is displayed
- Relock files updated for DCT4
- AutoUpdater Introduced
- USB Flashing Solved due to wrongly installed Flashing Cable Drivers on some configurations (i.e. Virgin PC)
- Database Unlock Introduced
- RPL Write revised
- PARTNERC certificate support added for Certificate Read
- PARTNERC certificate support added for Certificate Write
- PARTNERC certificate support addef for RPL Operations
- Erase files support added
- DCC configuration for NIMMIIIIRRFF06150000 added
- DCC configuration for NIMMIIIIRRFF095A1F05 added
- DCC configuration for NIMMIIIIRRFF095A1F04 added
- DCC configuration for NI00IIIIRR0306150018 added
- DCC configuration for NIMMIIIIRRFF095B1F05 added
- DCC configuration for NIMMIIIIRRFF0102F201 added
- DCC configuration for ISL2TI0200000103B840 added
- DCC configuration for 8600030001040A021001 added
- DCC configuration for 860003000104094B2F01 added
- DCC configuration for 86000300010401035424 added
- DCC configuration for NI00BC000003095B1F00 added
- DCC configuration for NI00BC0000030102F203 added
- DCC configuration for NI00BC0000030102F202 added
- DCC configuration for NI00BC000003095B1F05 added
- DCC configuration for NI00BC000003095B1F01 added
- DCC configuration for NI00IIIIRR030C213402 added
- DCC configuration for NI00IIIIRR030C213401 added
- DCC configuration for NI00IIIIRR030C20C605 added
- DCC configuration for NI00IIIIRR03094B2F01 added
- DCC configuration for NI00IIIIRR0301022E05 added
- DCC configuration for NI00IIIIRR0301022E01 added
- DCC configuration for NIMMIIIIRRFF0C206C02 added
- DCC configuration for NI00IIIIRR0301035602 added
- DCC configuration for NI00CS0000040C213402 added
- DCC configuration for NI00CS00000401022E05 added
- DCC configuration for NI00BC0000040F03F802 added
- DCC configuration for NI00BC0000040A4E2000 added
- DCC configuration for NI00BC000004095B1F01 added
- DCC configuration for NI00BC000004095B1F00 added
- DCC configuration for NI00BC0000040103B904 added
- DCC configuration for NI00BC0000040102F201 added
- DCC configuration for NI00BC00000401022C00 added
- DCC configuration for 0A4E2007 added
- DCC configuration for 0103B904 added
- SX4 Virgin PMs database updated, added RM-256, RM-497, RM-528V, RM-584, RM-586, RM-609, RM-612, RM-626, RM-638, RM-707, RM-712
- HWC/CCC Templates added for products RM-469, RM-540, RM-566, RM-528V, RM-596, RM-609, RM-614, RM-645
- Models.ini refreshed
- Skin Stack Updated
- Previous updates included
- Nokia Connectivity Cable Drivers updated to v7.1.42.0
- Box Firmware v01.73 Released



BUG FIXES & IMPROVEMENTS
- Afterwards DCT4 Erase All chips, the Permanent Data aren't restored anymore
- Fixed DCT4 RPL Write problem when only DATA2 exists in RPL file
- Fixed problems with handling RAPIDO > v11.16.00 loaders over FBUS (FUR control Add Problem)
- Check flashing Bus for WD2 fixed
- Read UEM Imei for WD2 Fixed
- Read ASK for WD2 Fixed
- Write RPL for WD2 Fixed
- Fixed lots of Access Violatios after closing up Nokia Tool
- Fixed bug with disappearing Tray icon after Minimize to Tray
- Bruteforce between NCK Fixed
- PM Write bugs fixed (Access Violation)
- Fixed bug with Broadcom Read Info
- Fixed spurious XGold2 product to be displayed in XGold1/DCT4 tab
- Fixed product mismatch on XG1/XG2 autodetection
- Fixed invalid Calculation of Mastercode
- 6230 Flashing Fixed (Given Image not maches with readen UPP Id or Image problem). If problem still exists - select all flashing files _MANUALLY_ don't use INI based (because there exists two HW versions E and M - autoselection is HWID based and may fails anytime).
- OMAP Loaders Fixed
- Fixed some wrong FBUS implementation when Packet size mod 0x78 == 0


Downloads

LINK1

LINK2

LINK3

Best Regards,
Cyclone Team

Cyclone Box Firmware v01.71 Released

Hi, new firmware for Cyclone Box is ready.

Signature: Cyclone Nokia/Blackberry Application v01.71, (Sep 11 2011 17:49:29, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011

What's new ?
- MEP-04104-008 added
- MEP-42490-002 added
- Optimizations in TX2 data shifting
- Fixed problems with resuming device from Static (sleep) mode on some configurations
- Fixed some variants of JCOP31 handling
- Minor changes and bugfixes

This is server-side update only, just do Box Maintenance and your box will be updated. Keep note that new major installer is still not ready yet (many internal changes related to engine, etc), however it should be ready within next week, so be prepared

Best Regards,
Cyclone Team

Cyclone Box Firmware v01.66 Released

Cyclone Box Firmware v01.64 Released

Cyclone Box Installer v1.15 Released

Hi, new update for Cyclone Box is Ready.
What's new ?

Where from download?
http://www.karwos.hk/CycloneBoxInstaller.exe

Best Regards & Stay Tuned,
Cyclone Box Team

CycloneBox Installer v1.14 Released - BB5 SL2/SL3 USB Unlock/SX4Auth/SDRepair Added

Hi to all!

New Cyclone Box Installer v1.14 is Ready.

What's new?

Quote:

===================== Installer v1.14 07.06.2011 ===================== - New BB5 FBUS/USB Loaders v11.16.0 Introduced - Unique Data Reading for RAPIDO based phones by USB added - Unique Data Reading for RAPU based phones by USB added - SL2 Unlock for Old Hash (E51..,..) and New Hash (6120c,6760) just by USB cable - SL3 Unlock by reading LBF data for all SL3 RAPIDO/RAPU Phones - Standalone Superdongle Auth - without SD key corruption - SD Keys Repair - Security Analyze - RPL Backup - All this using just usb cable... - Our loaders automatically set phone to LocalMode after reading LogData - tested with N97, seems 1st in world - RAPIDO phones before reading USB LogFile, needs to be manually set into FlashMode. Apporiate messagebox will be displayed with instructions (replug battery, cable, etc..). If your phone is RAPU or RAP4 based, you don't need to reject battery or do nothing - just click OK and it will switch to RAW mode directly. - We also added support for FUR-like flashing for RAPIDO phones. That means it's possible to flash these phones FBUS-like (completly erased, etc - FBUS protocol emulation). However, because of many problems we've disabled it in current release. You can test it manually by placing "v11.16.0" RAPIDO loaders into \Loaders\BB5\FPIF32BIT. * Known problems with RAPIDO 11.16.0 loaders: * FBUS support is broken * Readed Certificates via USB is broken (Control transactions support up to ~0x90 bytes of upcoming data) * Probably not working with Axxxx ROMS (E51) * Lot of other issues observed - The FUR-like flashing (not ADL though) will be probably enabled in next version after closer investigation - Fixed oclHashCat COD File bugs (occurs when last digit of imei is 0) - Box Firmware v01.62 Released - Minor changes and bugfixes

All, of course, standalone and free

Cyclone Box Installer v1.13, HD69xx Support, 15% Faster BF, 20 digits NCK, MEP-4, ..

---

Hi, New Installer for Cyclone Box is Ready.

What's new ?

=====================
Installer v1.13
24.05.2011
=====================
- New BB5 FBUS/USB Loaders v11.14.0 introduced
- Added 20 digits NCK recognization. Software will now give alert upon reading LBF data, when 20 digits NCK data will be found. This saves server time!
- The Profile Bits are also analyzed now during Reading LBF Data. If phone is i.e. from Telcel Mexico - LBF data will not be readen (because it will not accepted calculated NCK code). This saves server time!
- BB5/XGold LBF is creating now additional "BCL" format file
- BB5/XGold LBF is creating now additional "SHA" format file
- BB5/XGold LBF is creating now additional oclHashCat ATI based 64-bit BAT File
- BB5/XGold LBF is creating now additional oclHashCat ATI based 32-bit BAT File
- BB5/XGold LBF is creating now additional oclHashCat NVIDIA based 64-bit BAT File
- BB5/XGold LBF is creating now additional oclHashCat NVIDIA based 32-bit BAT File
- SIMLOC30 RPL Write Fixed (C7-00,C2-01,...)
- The generated "BAT" file could be used by oclHashCat-lite. It's 3rd party software, avaiable here: Download oclHashcat-lite-0.05.7z - hashcat, advanced password recovery . Unpack it somewhere, and place in same dir readen "BAT" files. oclHashCat is 15% faster (can reach 6Billions hashes/sec on 2xhd5970) than log2cod, plus it supports latest ATI GPUS (HD6970,HD6990,HD6xxx). It supports calculation resume, etc.
- You don't need now log2cod to generate LBF Data. Just use generated BAT file for fast oclHashCat calculation. Generated COD file you can send directly to our server via "Send COD File to server" button to receive valid Level 7 code.
- Added oclHashCat COD file format support (now you can use oclHashCat generated COD/TXT files to submit to server and calculate Level 7 code)
- Added MxCrap COD file format support (now you can use oclHashCat generated COD/TXT files to submit to server and calculate Level 7 code)
- Added warning message when TX2 transmission error occurs during 2ND Loader Initialization
- Upgraded RAPIDO Custom loader to v1.05. Fixed Reading Unique Data issues on old Public Rom (A8C1D671) based phones (N95,N78,...).
- BlackBerry MEP-4 calculation added
- Merged previous updates (RAPIDO/RAPU/RAP4 all latest hashes support for reading LBF data, etc...)
- Fixed Security Code Reset Issues on DCT4/BB5 Platform
- Firmware v1.61 Released
- Minor changes and bugfixes

Where from download?
http://www.karwos.hk/CycloneBoxInstaller.exe

The installer already contains all latest updates, you don't need to download nothing more!

Best Regards,
Cyclone Team